Bonds instantly to provide a permanent watertight seal that grows stronger over time. Flashband is ideal for new construction, maintenance and repair projects. |
||||
| Flashband is a self-adhesive, aluminum faced bituman backed sealing tape. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates. Flashband bonds to most building materials and provides a permanent watertight seal that improves with time. | ||||
| • BONDS TO WIDE RANGE OF MATERIALS |  |
|||
| Including brick, masonry, slate, concrete, roof tiles, | ||||
| wood, metal, terracotta tiles, glass, polystyrene, | ||||
| rigid plastics, gypsum board, vinyl siding, shingles, | ||||
| TPO, CPE, PVCs, asphalt BUR, coal tar BUR, etc. | ||||
| • VERSATILE | ||||
| • LONG LASTING PROTECTION | ||||
| Protects substrate at least fifteen years. | ||||
| • INSTANT WATERPROOF SEAL | ||||
| Even in damp conditions - ideal for emergency | ||||
| repairs. | ||||
| • QUICK AND EASY TO APPLY | ||||
| • NO SPECIALIST TOOLS REQUIRED | ||||
| Just a sharp knife and a hand roller. | ||||
| • MOULDS TO CONTOURS | ||||
| of building components and profiles. | ||||
| • COST EFFECTIVE | ||||
| method of flashing for new build, maintenance | ||||
| and repair. | ||||
| • WIDE RANGE OF SIZES | ||||
| 33 ft roll in widths from 2" to 28". | ||||
| Wide range of uses: | ||||
| ROOFING | ||||
| • Seals around chimneys, vents and skylights. | ||||
| • Reinforces and seals joints and penetrations. | ||||
| • Provides a cap seal in tile and slate roofs. | ||||
| • Repairs holes and perforations in metal roofing. | ||||
| • Seals and bridges gaps and seams. | ||||
| • Repairs modified or asphalt built up roofs. | ||||
| • Protects eaves from water intrusion due to ice damming. | ||||
| GLAZING | ||||
| • Protects and seals glazing bars and skylights. | ||||
| • Emergency repair to glass panes. | ||||
| DRAINAGE | ||||
| • Repairs and seals scuppers and down spouts. | ||||
| OTHER | ||||
| • Protects insulation, pipes and tanks. | ||||
| • Seals around vents in walls and roofs. | ||||
| • Seals around curbs and HVAC ductwork. | ||||
 |
||||
 |
Remove oil, grease, loose debris and visible moisture.
|
|||
 |
Unroll Flashband and remove backing paper. Cut length required with a sharp knife. | |||
 |
Position Flashband Tape and press into place with finger tip pressure. Ensure overlaps are protected by at least 1 inch of tape in order to achieve a perfect watertight seal. | |||
 |
Using a seam roller or piece of rounded wood smooth the tape to ensure good overall contact and expel any air, especially on overlaps. | |||
|
||||